The depth of this substance is 4 mm.
If you would like, you are able to raise the period of the structure to 6 metres or more. To try it, it is sufficient to attach a two-meter expansion. When picking a drawing, then focus on the space between the arches. This figure should be 65 cm, and that’s the most appropriate length for the specified depth of the material. The diameter of the doors in line with the maker’s drawing is 90 cm.
Before building a polycarbonate greenhouse, it’s important to select a place for the place. If that is done correctly, it is possible to provide yourself with a crop of fresh veggies for the whole year.
The location for your future greenhouse is marked immediately at the planning of the garden plot. To be able to melt the snow in the positioning of the greenhouse as soon as possible, the ideal point on the site is going to be a small elevation. Additionally, in such a place will not have to worry about large humidity as dirt and air in the construction.
Build a polycarbonate greenhouse in an elevated site – intends to look after the best temperatures indoors.
When it is not possible to place a greenhouse in an elevated gidpostroy.ru place, you will need to pour a coating of fine crushed stone about 20 cm and the exact same layer of fertile soil to create seedbeds.
Before building a greenhouse on your backyard plot, you should also consider where and how this construction is going to be installed. First, you must choose a place for this. The greenhouse should be found at a well-lit area no less than a few meters away from houses, barns and other structures.
How to install a greenhouse Based on the Surfaces of the Planet
Make sure you measure the dirt surface – it’s ideal to remove the top layer. This can also eliminate weed seeds. And for ease of work, remove the dirt in a place that’s going to a meter wider on each side of the rectangle that you desire.
Additionally, it is worth thinking about having a base. As manufacturers say, now most greenhouses do not need it, especially if they (greenhouses) are utilized only in the spring and summer period. But, seasoned anglers still recommend earning an elementary basis from a bar. It’s quite simple – it’s enough to connect with each other utilizing metal screws and corners four pieces of wood using a cross-section of at least 10 * 10 cm. The dimensions of such a base should be equal to the base of the upcoming greenhouse.
Simple bar base
You could even create a strip foundation of concrete. He’s more reliable than a pub base, but requires more fiscal and labour expenses. Incidentally, the greenhouse, which will be utilised in the winter, with no and do not do without it whatsoever.
Stages of the formation of a strip base: a schematic representation
Many manufacturers counsel to put in greenhouse structures without building a foundation. For this function, they equip the frame with specific T-shaped legs, so that the construction was securely fixed. However, as practice shows, it is still essential to construct a base: so and the basis will be more rigorously fixed and the components of the basis in touch with the soil, will be stored much more in its initial state.
The main thing is to treat the material with specific agents to protect the wood from moisture. The substance is normally installed on concrete cubes that are dug into the soil. To get a six-meter arrangement, they need 10 bits: four on either side and one in the middle of the endings.
Before you do the greenhouse itself, you want to choose the right location for this. It has to be an even site, so the frame was found evenly, without distortions. It should be bright and not obscured by trees or buildings.